Follower Reads

On this page Carat arrow pointing down
Warning:
CockroachDB v21.2 is no longer supported. For more details, see the Release Support Policy.

CockroachDB can provide faster reads in situations where you can afford to read data that is slightly stale. These stale reads (known as follower reads) are available in read-only transactions that use the AS OF SYSTEM TIME clause.

Note:

This is an enterprise-only feature. Request a 30-day trial license to try it out.

Normally, reads must be serviced by a replica's leaseholder. This can be slow, since the leaseholder may be geographically distant from the gateway node that is issuing the query.

A follower read is a read taken from the closest replica, regardless of the replica's leaseholder status. As long as your SELECT operations can tolerate reading stale data, follower reads can reduce read latencies and increase throughput. This can be especially useful in multi-region deployments.

For instructions showing how to use follower reads to get low latency, historical reads in a multi-region deployment, see the Follower Reads Pattern.

How follower reads work

Each CockroachDB range tracks a property called its closed timestamp, which means that no new writes can ever be introduced at or below that timestamp. The closed timestamp is advanced continuously on the leaseholder, and lags the current time by some target interval. As the closed timestamp is advanced, notifications are sent to each follower. If a range receives a write at a timestamp less than or equal to its closed timestamp, the write is forced to change its timestamp, which might result in a transaction retry error.

With follower reads, any replica in a range can serve a read for a key as long as the time at which the operation is performed (i.e., the AS OF SYSTEM TIME value) is less than or equal to the range's closed timestamp.

When a gateway node in a cluster receives a request to read a key with a sufficiently old AS OF SYSTEM TIME value, it forwards the request to the closest node that contains a replica of the data—whether it be a follower or the leaseholder.

CockroachDB provides the following types of follower reads:

  • Exact staleness reads: These are historical reads as of a static, user-provided timestamp. Most often, this is the timestamp value returned by the follower_read_timestamp() convenience function. For more information, see Exact staleness reads.
  • New in v21.2: Bounded staleness reads: These use a dynamic, system-determined timestamp to minimize staleness while being more tolerant to replication lag than exact staleness reads. This dynamic timestamp is returned by the with_min_timestamp() or with_max_staleness() functions. In addition, bounded staleness reads provide the ability to serve reads from local replicas even in the presence of network partitions or other failures. For more information, see Bounded staleness reads.

Exact staleness reads

An exact staleness read is a historical read as of a static, user-provided timestamp. Most users will get an exact staleness read by using the timestamp value returned by the follower_read_timestamp() convenience function. For an example showing how to use this function to get an exact staleness read, see Run queries that use exact staleness reads.

When to use exact staleness reads

Use exact staleness follower reads when:

  • You need multi-statement reads inside transactions.
  • You can tolerate reading older data (at least 4.8 seconds in the past), to reduce the chance that the historical query timestamp is not quite old enough to prevent blocking on a conflicting write and thus being able to be served by a local replica.
  • You do not need the increase in availability provided by bounded staleness reads in the face of network partitions or other failures.
  • You need a read that is slightly cheaper to perform than a bounded staleness read, because exact staleness reads don't need to dynamically compute the query timestamp.

You should not use follower reads when your application cannot tolerate reading stale data, since the results of follower reads may not reflect the latest writes against the tables you are querying. However, for many applications, especially in multi-region deployments, there are opportunities to do useful work with follower reads.

Bounded staleness reads

A bounded staleness read is a historical read that uses a dynamic, system-determined timestamp to minimize staleness while being more tolerant to replication lag than exact staleness reads. They also help increase system availability, since they provide the ability to serve reads from local replicas even in the presence of network partitions or other failures that prevent the SQL gateway from communicating with the leaseholder. For more information about when to use bounded staleness reads, see When to use bounded staleness reads.

To get a bounded staleness read, use one of the following built-in functions:

Name Description
with_min_timestamp(TIMESTAMPTZ, [nearest_only]) New in v21.2: Defines a minimum timestamp at which to perform the bounded staleness read. The actual timestamp of the read may be equal to or later than the provided timestamp, but cannot be before the provided timestamp. This is useful to request a read from nearby followers, if possible, while enforcing causality between an operation at some point in time and any dependent reads. This function accepts an optional nearest_only argument that will error if the reads cannot be serviced from a nearby replica.
with_max_staleness(INTERVAL, [nearest_only]) New in v21.2: Defines a maximum staleness interval with which to perform the bounded staleness read. The timestamp of the read can be at most this stale with respect to the current time. This is useful to request a read from nearby followers, if possible, while placing some limit on how stale results can be. Note that with_max_staleness(INTERVAL) is equivalent to with_min_timestamp(now() - INTERVAL). This function accepts an optional nearest_only argument that will error if the reads cannot be serviced from a nearby replica.

For examples showing how to use these functions to get bounded staleness reads, see Run queries that use bounded staleness follower reads.

When to use bounded staleness reads

Use bounded staleness follower reads when:

  • You need minimally stale reads from the nearest replica without blocking on conflicting transactions. This is possible because the historical timestamp is chosen dynamically and the least stale timestamp that can be served locally without blocking is used.
  • You can confine the read to a single statement that meets the bounded staleness limitations.
  • You need higher availability than is provided by exact staleness reads. Specifically, what we mean by availability in this context is:
    • The ability to serve a read with low latency from a local replica rather than a leaseholder.
    • The ability to serve reads from local replicas even in the presence of a network partition or other failure event that prevents the SQL gateway from communicating with the leaseholder. Once a replica begins serving follower reads at a timestamp, it will always continue to serve follower reads at that timestamp. Even if the replica becomes completely partitioned away from the rest of its range, it will continue to stay available for (increasingly) stale reads.

You should not use follower reads when your application cannot tolerate reading stale data, since the results of follower reads may not reflect the latest writes against the tables you are querying. However, for many applications, especially in multi-region deployments, there are opportunities to do useful work with follower reads.

Watch the demo

Note:

This video uses exact staleness follower reads; it was recorded before bounded staleness reads were possible with CockroachDB.

Use follower reads

Verify that follower reads are happening

To verify that your cluster is performing follower reads, go to the Custom Chart Debug Page in the DB Console and add the metric follower_read.success_count to the time-series graph you see there. The number of follower reads performed by your cluster will be shown.

Run queries that use exact staleness follower reads

Any SELECT statement with an appropriate AS OF SYSTEM TIME value can be an exact staleness follower read.

For exact staleness reads, you can use the convenience function follower_read_timestamp(), which returns a TIMESTAMP that provides a high probability of being served locally while not blocking on conflicting writes.

Use this function in an AS OF SYSTEM TIME statement as follows:

SELECT ... FROM ... AS OF SYSTEM TIME follower_read_timestamp();

Run queries that use bounded staleness follower reads

As described in Bounded staleness read limitations, bounded staleness follower reads are available under the following conditions:

In this example, we will perform a bounded staleness follower read against a demo cluster with the MovR dataset.

First, start the demo cluster:

icon/buttons/copy
cockroach demo

Next, issue a single-statement point query to select a single row from a table at a historical timestamp by passing the output of the with_max_staleness() function to the AS OF SYSTEM TIME clause:

icon/buttons/copy
SELECT code FROM promo_codes AS OF SYSTEM TIME with_max_staleness('10s') where code = '0_explain_theory_something';
             code
------------------------------
  0_explain_theory_something
(1 row)

The query returns successfully. If it had failed with the following error message, you would need to troubleshoot your query to ensure it meets the conditions required for bounded staleness reads.

ERROR: unimplemented: cannot use bounded staleness for queries that may touch more than one row or require an index join
SQLSTATE: 0A000
HINT: You have attempted to use a feature that is not yet implemented.
See: https://go.crdb.dev/issue-v/67562/v21.2

You can verify using EXPLAIN that the reason this query was able to perform a bounded staleness read is that it performed a point lookup from a single row:

icon/buttons/copy
EXPLAIN SELECT code FROM promo_codes AS OF SYSTEM TIME with_max_staleness('10s') where code = '0_explain_theory_something';
                                      info
--------------------------------------------------------------------------------
  distribution: local
  vectorized: true

  • scan
    estimated row count: 1 (0.10% of the table; stats collected 4 minutes ago)
    table: promo_codes@primary
    spans: [/'0_explain_theory_something' - /'0_explain_theory_something']
(7 rows)

Use exact staleness follower reads in a read-only transaction

You can set the AS OF SYSTEM TIME clause's value for all operations in a read-only transaction:

BEGIN;

SET TRANSACTION AS OF SYSTEM TIME follower_read_timestamp();
SELECT ...
SELECT ...

COMMIT;

Follower reads are "read-only" operations; you cannot use them in read-write transactions.

Tip:

Using the SET TRANSACTION statement as shown in the example above will make it easier to use exact staleness follower reads from drivers and ORMs.

To set AS OF SYSTEM TIME follower_read_timestamp() on all implicit and explicit read-only transactions by default, use one of the following options:

  • Set the default_transaction_use_follower_reads session variable to on. When default_transaction_use_follower_reads=on, all read-only transactions use exact staleness follower reads.
  • Execute the SET SESSION CHARACTERISTICS AS TRANSACTION AS OF SYSTEM TIME follower_read_timestamp() SQL statement. This has the same effect as setting the session variable as shown above.

New in v21.2: You can set default_transaction_use_follower_reads on a per-role basis; for instructions, see Set default session variable values for a role.

Limitations

Exact staleness reads and long-running writes

Long-running write transactions will create write intents with a timestamp near when the transaction began. When an exact staleness follower read encounters a write intent, it will often end up in a "transaction wait queue", waiting for the operation to complete; however, this runs counter to the benefit exact staleness reads provide.

To counteract this, you can issue all follower reads in explicit transactions set with HIGH priority:

BEGIN PRIORITY HIGH AS OF SYSTEM TIME follower_read_timestamp();
SELECT ...
SELECT ...
COMMIT;

Exact staleness read timestamps must be far enough in the past

If an exact staleness read is not using an AS OF SYSTEM TIME value far enough in the past, CockroachDB cannot perform a follower read. Instead, the read must access the leaseholder replica. This adds network latency if the leaseholder is not the closest replica to the gateway node. Most users will use the follower_read_timestamp() function to get a timestamp far enough in the past that there is a high probability of getting a follower read.

Bounded staleness read limitations

Bounded staleness reads have the following limitations:

For example, let's look at a read query that cannot be served as a bounded staleness read. We will use a demo cluster, which automatically loads the MovR dataset.

icon/buttons/copy
cockroach demo
icon/buttons/copy
SELECT code FROM promo_codes AS OF SYSTEM TIME with_max_staleness('10s') LIMIT 1;
ERROR: unimplemented: cannot use bounded staleness for queries that may touch more than one row or require an index join
SQLSTATE: 0A000
HINT: You have attempted to use a feature that is not yet implemented.
See: https://go.crdb.dev/issue-v/67562/v21.2

As noted by the error message, this query cannot be served as a bounded staleness read because in this case it would touch more than one row. Even though we used a LIMIT 1 clause, the query would still have to touch more than one row in order to filter out the additional results.

We can verify that more than one row would be touched by issuing EXPLAIN on the same query, but without the AS OF SYSTEM TIME clause:

icon/buttons/copy
EXPLAIN SELECT code FROM promo_codes LIMIT 5;
                                     info
-------------------------------------------------------------------------------
  distribution: full
  vectorized: true

  • scan
    estimated row count: 1 (0.10% of the table; stats collected 1 minute ago)
    table: promo_codes@primary
    spans: LIMITED SCAN
    limit: 1
(8 rows)

The output verifies that this query performs a scan of the primary index on the promo_codes table, which is why it cannot be used for a bounded staleness read.

For an example showing how to successfully perform a bounded staleness read, see Run queries that use bounded staleness follower reads.

See also


Yes No
On this page

Yes No