ORDER BY

On this page Carat arrow pointing down
Warning:
CockroachDB v22.1 is no longer supported. For more details, see the Release Support Policy.

The ORDER BY clause controls the order in which rows are returned or processed. It can be used in any selection query, including as operand of INSERT or UPSERT, as well as with DELETE and UPDATE statements.

Synopsis

ORDER BY a_expr ASC DESC NULLS FIRST LAST PRIMARY KEY table_name INDEX table_name @ index_name ASC DESC ,

Parameters

The ORDER BY clause takes a comma-separated list of ordering specifications. Each ordering specification is composed of a column selection followed optionally by the keyword ASC or DESC.

Each column selection can take one of the following forms:

  • A simple column selection, determined as follows:
    1. The name of a column label configured with AS earlier in the SELECT clause. This uses the value computed by the SELECT clause as the sorting key.
    2. A positive integer number, designating one of the columns in the data source, either the FROM clause of the SELECT clause where it happens or the table being written to by DELETE or UPDATE. This uses the corresponding input value from the data source to use as the sorting key.
    3. An arbitrary scalar expression. This uses the result of evaluating that expression as the sorting key.
  • The notation PRIMARY KEY <table_name>. This uses the primary key column(s) of the given table as sorting key. This table must be part of the data source.
  • The notation INDEX <table_name>@<index_name>. This uses the columns indexed by the given index as sorting key. This table must be part of the data source.

The optional keyword ASC after a column selection indicates to use the sorting key as-is, and thus is meaningless.

The optional keyword DESC inverts the direction of the column(s) selected by the selection that immediately precedes.

New in v22.1: CockroachDB supports NULLS FIRST and NULLS LAST in ORDER BY clauses for compatibility with PostgreSQL row-sorting syntax. The default CockroachDB ordering is NULLs first for ascending order and NULLs last for descending order, which is the opposite of the PostgreSQL default. To change the default CockroachDB ordering, set the null_ordered_last session variable to true.

Order preservation

In general, the order of the intermediate results of a query is not guaranteed, even if ORDER BY is specified. In other words, the ORDER BY clause is only effective at the top-level statement. For example, it is ignored by the query planner when present in a sub-query in a FROM clause as follows:

icon/buttons/copy
>  SELECT * FROM a, b ORDER BY a.x;                 -- valid, effective
>  SELECT * FROM (SELECT * FROM a ORDER BY a.x), b; -- ignored, ineffective

However, when combining queries together with sub-queries, some combinations will make the ORDER BY clause in a sub-query significant:

  1. The ordering of the operand of a WITH ORDINALITY clause (within the FROM operand of a SELECT clause) is preserved, to control the numbering of the rows.
  2. The ordering of the operand of a stand-alone LIMIT or OFFSET clause (within a FROM operand of a SELECT clause) is preserved, to determine which rows are kept in the result.
  3. The ordering of the data source for an INSERT statement or an UPSERT statement that also uses LIMIT is preserved, to determine which rows are processed, but not their order.
  4. The ordering indicated for an UPDATE or DELETE statement that also uses LIMIT is used to determine which rows are processed, but not their order. (This is a CockroachDB extension.)
  5. The ordering of a sub-query used in a scalar expression is preserved.

For example, using WITH ORDINALITY:

icon/buttons/copy
> SELECT * FROM (SELECT * FROM a ORDER BY a.x) WITH ORDINALITY;
  -- ensures that the rows are numbered in the order of column a.x.

For example, using a stand-alone LIMIT clause in FROM:

icon/buttons/copy
> SELECT * FROM a, ((SELECT * FROM b ORDER BY b.x) LIMIT 1);
  -- ensures that only the first row of b in the order of column b.x
  -- is used in the cross join.

For example, using a sub-query in scalar context:

icon/buttons/copy
> SELECT ARRAY(SELECT a.x FROM a ORDER BY a.x);
  -- ensures that the array is constructed using the values of a.x in sorted order.
> SELECT (1, 2, 3) = (SELECT a.x FROM a ORDER BY a.x);
  -- ensures that the values on the right-hand side are compared in the order of column a.x.

Ordering of rows without ORDER BY

Without ORDER BY, rows are processed or returned in a non-deterministic order. "Non-deterministic" means that the actual order can depend on the logical plan, the order of data on disk, the topology of the CockroachDB cluster, and is generally variable over time.

Sorting using simple column selections

Considering the following table:

icon/buttons/copy
> CREATE TABLE a(a INT);
> INSERT INTO a VALUES (1), (3), (2);

The following statements are equivalent:

icon/buttons/copy
> SELECT a AS b FROM a ORDER BY b; -- first form: refers to an AS alias.
> SELECT a      FROM a ORDER BY 1; -- second form: refers to a column position.
> SELECT a      FROM a ORDER BY a; -- third form: refers to a column in the data source.
+---------+
| a       |
+---------+
|       1 |
|       2 |
|       3 |
+---------+
(3 rows)

Note that the order of the rules matter. If there is ambiguity, the AS aliases take priority over the data source columns, for example:

icon/buttons/copy
> CREATE TABLE ab(a INT, b INT);
> SELECT a AS b, b AS c FROM ab ORDER BY b; -- orders by column a, renamed to b
> SELECT a,      b      FROM ab ORDER BY b; -- orders by column b

It is also possible to sort using an arbitrary scalar expression computed for each row, for example:

icon/buttons/copy
> SELECT a, b FROM ab ORDER BY a + b; -- orders by the result of computing a+b.

Sorting using multiple columns

When more than one ordering specification is given, the later specifications are used to order rows that are equal over the earlier specifications, for example:

icon/buttons/copy
> CREATE TABLE ab(a INT, b INT);
> SELECT a, b FROM ab ORDER BY b, a;

This sorts the results by column b, and then if there are multiple rows that have the same value in column b, it will then order these rows by column a.

Inverting the sort order

The keyword DESC ("descending") can be added after an ordering specification to invert its order. This can be specified separately for each specification, for example:

icon/buttons/copy
> CREATE TABLE ab(a INT, b INT);
> SELECT a, b FROM ab ORDER BY b DESC, a; -- sorts on b descending, then a ascending.

Sorting in primary key order

The ORDER BY PRIMARY KEY notation guarantees that the results are presented in primary key order.

The particular advantage is that for queries using the primary index, this guarantees the order while also guaranteeing there will not be an additional sorting computation to achieve it, for example:

icon/buttons/copy
> CREATE TABLE kv(k INT PRIMARY KEY, v INT);
> SELECT k, v FROM kv ORDER BY PRIMARY KEY kv; -- guarantees ordering by column k.

If a primary key uses the keyword DESC already, then its meaning will be flipped (cancelled) if the ORDER BY clause also uses DESC, for example:

icon/buttons/copy
> CREATE TABLE ab(a INT, b INT, PRIMARY KEY (b DESC, a ASC));
> SELECT * FROM ab ORDER BY b DESC; -- orders by b descending, then a ascending.
                                    -- The primary index may be used to optimize.

> SELECT * FROM ab ORDER BY PRIMARY KEY ab DESC; -- orders by b ascending, then a descending.
                                                 -- The index order is inverted.

Sorting in index order

The ORDER BY INDEX notation guarantees that the results are presented in the order of a given index.

The particular advantage is that for queries using that index, this guarantees the order while also guaranteeing there will not be an additional sorting computation to achieve it, for example:

icon/buttons/copy
> CREATE TABLE kv(k INT PRIMARY KEY, v INT, INDEX v_idx(v));
> SELECT k, v FROM kv ORDER BY INDEX kv@v_idx; -- guarantees ordering by column v.

If an index uses the keyword DESC already, then its meaning will be flipped (cancelled) if the ORDER BY clause also uses DESC, for example:

icon/buttons/copy
> CREATE TABLE ab(a INT, b INT, INDEX b_idx (b DESC, a ASC));
> SELECT * FROM ab ORDER BY b DESC; -- orders by b descending, then a ascending.
                                    -- The index b_idx may be used to optimize.

> SELECT * FROM ab ORDER BY INDEX ab@b_idx DESC; -- orders by b ascending, then a descending.
                                                 -- The index order is inverted.

Ordering rows in DML statements

When using ORDER BY with an INSERT, UPSERT, UPDATE or DELETE (i.e., a DML statement), the ORDER BY clause is ignored if it is not used in combination with LIMIT and/or OFFSET.

The combination of both ORDER BY and LIMIT/OFFSET determines which rows of the input are used to insert, update or delete the table data, but it does not determine in which order the mutation takes place.

For example, using LIMIT in INSERT:

icon/buttons/copy
> INSERT INTO a SELECT * FROM b ORDER BY b.x LIMIT 1;
  -- ensures that only the first row of b in the order of column b.x
  -- is inserted into a.

The reason why ORDER BY does not control the final order of the rows in the table is that the ordering of rows in the target table is determined by its primary and secondary indexes.

To order the result of the RETURNING clause, see Sorting the output of deletes.

Sorting the output of deletes

To sort the output of a DELETE statement, use:

icon/buttons/copy
> WITH a AS (DELETE ... RETURNING ...)
  SELECT ... FROM a ORDER BY ...

For an example, see Sort and return deleted rows.

See also


Yes No
On this page

Yes No